The top part of the Kitchen Counter Pop Up Outlets - Flush Mount is made of durable metal. This flush countertop outlet is designed to seamlessly blend with your kitchen decor, providing a sleek, flush electrical outlet solution. See full answer »
The perfect low profile addition to your kitchen counter top! Power within reach that pops up when you need it and presses down into the surface when you don’t for a clean and stylish look. Flange sets seamlessly into your surface with a flush fit.
• UL Listed for Counter Top Installations
• Water and Tamper Resistant Receptacles
• Dual-Sided, two power outlets per unit
• Spring-Loaded Pop Up
Flush mount installation: cut a 3-7/16” diameter hole through your top, then rout an additional opening that is 4” in diameter and 3/32” deep for the flange to set in completely flush with the surface. Drop in from the top and hand tighten the locking ring underneath to secure in place. Have a licensed electrician hardwire into a GFCI circuit to finish the job and you’re ready to enjoy the convenience of water-tight power directly on the counter top. Great not only for kitchen installations, but also any other potential wet areas.
Also available in a non-flush mount version PCS103A with an easier installation that does not require the additional countersunk cutout and sits a mere 3/32” above the surface.
One 15A outlet per side
Conduit not included
UL File RTRT.E2186 - Meets NEC code 406.5E for countertops, UL 223A for US, cUL for Canada, CSA approved for Canada