PCS63 - Dot - 1 Power/Dual USB - LIMITED TO STOCK ON HAND
Description
Essentials. Low profile power, dual USB charger with a shared 3A rating, and the option to add two Cat5 data jacks all housed in a small, unobtrusive surface-mount grommet that sits nearly flush with the surface. Open face access for no-nonsense applications where connections are needed. Put all your basic power and data amenities within reach on your work surface without interfering with your work flow.
ā¢ Mounts nearly flush into any surface
ā¢ 1 Power Outlet
ā¢ Dual USB Charger
ā¢ Room for two additional Data or Audio/Video Jacks
ā¢ UL Listed
Drill a 3 3/4ā (95MM) diameter cutout in your desktop and drop in from the top, then hand tighten the locking ring from underneath to secure into place. Easy to install, easy to operate with plug and play connections. Power outlet is Tamper Resistant and rated 15A/125VAC. Top sits merely 3/32ā above the surface.
ā¢ Mounts nearly flush into any surface
ā¢ 1 Power Outlet
ā¢ Dual USB Charger
ā¢ Room for two additional Data or Audio/Video Jacks
ā¢ UL Listed
Drill a 3 3/4ā (95MM) diameter cutout in your desktop and drop in from the top, then hand tighten the locking ring from underneath to secure into place. Easy to install, easy to operate with plug and play connections. Power outlet is Tamper Resistant and rated 15A/125VAC. Top sits merely 3/32ā above the surface.
Overall: 5 1/8ā diameter
Cutout: 3 3/4ā diameter
9 ft. electrical cord
Recommended table thickness: 1/2ā minimum to 2ā maximum
This part has been discontinued and is limited to stock on hand. They are non-returnable and non-refundable.
Cutout: 3 3/4ā diameter
9 ft. electrical cord
Recommended table thickness: 1/2ā minimum to 2ā maximum
This part has been discontinued and is limited to stock on hand. They are non-returnable and non-refundable.
UL listed and tested to meet UL962A (Furniture Power and Distribution Units). UL File No. E326685 (PUNTO). Electrical codes vary by location. Please check with your electrician to verify that this unit meets your local code before installing. |