PCS50K - The Miko (2 Power/USBA+C/Flex Port)
Description
Press down on the lid to pop up for access to the two electrical outlets rated 15A/125VAC, a dual USB charger consisting of USB-A and USB-C connectors, and a “flex port” shudder bushing for running additional cables. When not in use, press back down to closed position. Spring-loaded unit clicks closed nearly flush with the surface for a clean and low profile look on any surface.
• Pop up for access, press down to close
• 2 Power Outlets
• 1 USB-A, 1 USB-C
• Flex-Port shudder bushing for additional cable pass-thru
• UL Listed
• Pop up for access, press down to close
• 2 Power Outlets
• 1 USB-A, 1 USB-C
• Flex-Port shudder bushing for additional cable pass-thru
• UL Listed
Unique pop up design incorporates a brush liner into the front edge of the unit for wire pass through and to keep cables from falling through. The brush guard also serves as a dust protector. The flexible rubber pedals on the flex port module will grab plug heads and prevent them from slipping through and down below the unit. Having USB-A and USB-C paired together will help to universally charge any mobile device regardless of plug style.
Overall: 8-5/32” x 6-11/32”
Cut Out: 7-7/8” X 5-31/32”
6 ft. electrical cord.
Data module is unwired.
USB-A delivers 2 Amps and USB-C delivers 10 Watts
Additional inserts available here: black module option or white module option.
Overall: 8-5/32” x 6-11/32”
Cut Out: 7-7/8” X 5-31/32”
6 ft. electrical cord.
Data module is unwired.
USB-A delivers 2 Amps and USB-C delivers 10 Watts
Additional inserts available here: black module option or white module option.
Custom Options
We can customize this unit to suit your specific needs, including but not limited to:
•Custom Configurations
•Custom Cord Lengths
•Hardwired
•Daisy Chain
•Tamper Resistant Outlets
•Hospital Grade Receptacles
Please contact us for further information on pricing and lead times.
 | UL File No. E350502 (model PCS50). Electrical codes vary by location. Please check with your electrician to verify that this unit meets your local code before installing. |
 | Made in USA |