PCS50G - Flip-up Power Grommet with Brush Liner (2 Power/2 Flex-Port)
Description
Gently push on the front end of the unit, and the spring loaded lid flips up at an angle with a flat face for easy access to the two electrical outlets rated 15A/125VAC and two Flex-Port bushings for wire pass-through. Bushings will catch any cables from slipping down through the openings and can remain in use even while the lid is closed. Clicks closed for a clean and low profile look.
• Flip-up for access, press down to close
• 2 Power Outlets
• 2 Flex Port Shutter Bushings for cable pass through
• Includes Brush Liner for cable management and dust guard
• UL Listed
Unique flip-up design incorporates a brush liner into the front edge over the gap for additional wire pass-through and to keep cables from falling through.
• Flip-up for access, press down to close
• 2 Power Outlets
• 2 Flex Port Shutter Bushings for cable pass through
• Includes Brush Liner for cable management and dust guard
• UL Listed
Unique flip-up design incorporates a brush liner into the front edge over the gap for additional wire pass-through and to keep cables from falling through.
Overall: 8 5/32" x 6 11/32".
Cut Out: 7 7/8" x 5 31/32".
6 ft. electrical cord.
Additional stock configurations available: PCS50 Series.
Finishes: Black Anodized with black plugs/black brush, Satin Aluminum with black plugs/black brush, Satin Aluminum with white plugs/black brush and Satin Aluminum with white plugs/white brush.
Cut Out: 7 7/8" x 5 31/32".
6 ft. electrical cord.
Additional stock configurations available: PCS50 Series.
Finishes: Black Anodized with black plugs/black brush, Satin Aluminum with black plugs/black brush, Satin Aluminum with white plugs/black brush and Satin Aluminum with white plugs/white brush.
 | UL listed and tested to meet UL962A (Furniture Power and Distribution Units). UL File No. E350502 (model PCS50). Electrical codes vary by location. Please check with your electrician to verify that this unit meets your local code before installing. |
Custom Options
We can customize this unit to suit your specific needs, including but not limited to:
•Custom Configurations
•Custom Cord Lengths
•Hardwired
•Daisy Chain
•Tamper Resistant Outlets
•Hospital Grade Receptacles
•USB-C
Please contact us for further information on pricing and lead times.
 | Made in USA |